Home > Prodcuts > Solenoid Valve
  • ZSQ 2 Way Piston cut-off valve
    2 WAY, 3 WAY PISTON CUT-OFF VALVE

    1) Working pressure: PN 40-60 Bar

    2) Port Size: G1/2''-G4''  DN15-DN100F

    3) Water , Oil , Steam Working system 
    4) Thread Port and Flange Port

  • Brass/Stainless Steel/Aluminum Manifold 1/8
    Brass/Stainless Steel/Aluminum Manifold 1/8"-2'' Solenoid Valve

     

    Body material: Brass/Aluminum/Stainlee Steel

    Internal component:stainless steel

    Orifice:Φ10.0mm

     

    Connection:outlet connection: 1/8" 1/4" 3/8" 1/2",3/4'',1'',2''

    Voltage:AC220V 110V 24V 50/60HZ DC24V 12V

  • Single / Double acting Normally Closed Angle Seat Valve
     Single / Double acting Normally Closed Angle Seat Valve

    1. Actuator material: Plastic or stainless steel

    2. Valve body material:Stainless steel 304 or 316

    3. End Connection: Thread in NPT, BSP or BSPT

    4. Port size: DN15~50, PN25

    5. Fluid:steam, air, Water,oil Fluid pressure:0~16bar  

     

     

  • FDF1/2 Fountain Under water solenoid valve
    1.Design for fountain system 

    2.temperature:-5~60ºC
    3.pressure:0~6bar
    5.voltage:AC220V/50HZ/DC24V/AC110V/50HZ

    6.body material: strailess steel/ brass/ PA / cast iron

  • 2W025-15 G1/2 2/2 direct acting solenoid valve
    1) Body material: brass / stainless steel 
    2) Operating type: normally closed / normally opened 
    3) Mode of action: 2/2-way, direct acting / semi-direct lift type 
    4) Sealing material: NBR, EPDM, or Viton; NBR is standard 
    5) Coil grade: class B, IP54 / IP65
    6) Suitable for applications with temperature below 120°C 
    7) Connection pipe size: thread 1/8", 1/4" - 2"
  • ZS-25 2/2 Diaphragm pilot operated solenoid valve
    1. Solenoid Valve Normally Open/Closed
    2. Fluid media: Air,Natural gas, Water, Hot water, Light oil
    3. Orifice: Φ2.5- Φ50mm
    4. Operating press. :0~5kgf/cm2
    5:Voltage:220VAC/230VAC/240VAC/110VAC/24VAC     50/60HZ 24VDC/12VDC
  • SLP 2/2-way Diaphragm pilot operated solenoid valve
    SLP 2/2-way Diaphragm pilot operated solenoid valve
    1. Working Pressure: 0.5-16bar 
    2. Sealing material:NBR VITON EPDM etc 
    3. normally Closed/ Open , Pipe Connection :3/8"~2"
    4. 
    Media : Water , Hot water , Air ,Gas , Oil.
  • SLP 2/2-way pilot operated solenoid valve
    1:  2/2 normally Closed / Open solenoid valve when energized.

    2:  Serialized products,small in size .large flow rate,widely use 1/8''-2'',Flange DN25-DN50

    3:  Body material:forged brass cast brass(for orifice 32 40 50 only)

    5:  flow as the arrow,mounts in any position :best position is solenoid vertical and upright direction.

    6:  Voltage:220VAC/230VAC/240VAC/110VAC/24VAC     50/60HZ 24VDC/12VDC

       

  • PU110 1/2 Timer controlled Solenoid Valve
    1.2/2 Normal Closed ,Auto Stainer, Timer Controlled Solenoid Valve
    2.It can be installed at any angle, but it is a good choice when the horizontal tube keep upward.
    3.Used to control automatically the liquid and gas in the pipeline
  • PU220 1/2 Timer controlled Solenoid Valve
    1) Timer controlled solenoid valve: PU220 series 
    2) Used in air compression system to timely let out the Condensate water
    3) Connection port: G1/4" or G3/8" or G1/2"
    4) Working pressure: 1.6MPa, 2.5MPa, 4.0MPa, 8.0MPa
    5) Voltage: 24 - 240V AC / DC
  • THP-25 1 High Temperature Steam Solenoid Valve

    1.1/8''-2''and 1''-2'' flange solenoid valve for high temperature Steam. 
    2.Working pressure:0-25bar ; Working Temperature: 0-180℃.
    3.material:brass & stainless steel SS304/SS316
    4.Connect Size: Thread & Flange(BSPP, BSPT, NPT)

  • Pulse Jet Solenoid Valve
    Pulse Jet Solenoid Valve UME-25 G1"
    High quality right angle solenoid pulse valve with imported Diaphragm, used for controlling the compressed air of dust remover filter system.
    Die-casting aluminum alloy valve body, stainless steel screw and long life working condition.
  • Total Products: 13 Page: 1 of 2 First ←Previous Next→ End
    Google | Made-In-China | Godaddy |
    HOME | Products | About Us | Capability | Inquiry | Contact Us | SiteMap
    Copyright (c) Frima Pneumatic & Hydraulic Industry All Rights Reserved